Better Heavy Duty Urethane
The Alaska Heavy Duty elevator bucket is engineered to exceed the performance requirements of the standard bucket. This bucket is designed with thicker walls and a reinforced front lip to increase bucket life and reduce breakage. Replacing existing CC-HD or Standard Duty buckets with the Alaska will create longer bucket life and less frequent replacements. Standard spacing is nominal projection + 2”. The most common applications include grain, fertilizer, pellets, corn, wheat, soybeans and other agricultural applications. The Alaska bucket stands second only to the Tiger-Tuff in strength and thickness.
- Thicker corners
- Thicker walls, heavy front lip for digging
- More capacity
- Cleaner discharge
- High impact and abrasion resistant
- Non-corrosive, non-sparking
- Increases elevator capacity
- Lowers elevator maintenance
- Extends bucket life
- Decreases elevator down-time
- Corrosion resistant
MOUNTING HOLES AND VENTING TO YOUR SPECIFICATIONS
Elevator buckets are manufactured without a drill pattern. Special drilling or punching can be accommodated upon customer request.
Available as needed.
Use slightly larger metal digger elevator buckets to help loosen material in the elevator boot section that has set up or hardened, thereby reducing abrasion on the plastic buckets. Call for details on Metal Digger elevator bucket options.
See elevator bucket spacing details in the Alaska Bucket chart above (depending on materials and speeds, smaller and larger spacing may be used).
Use a #1 standard elevator bolt or Sabre-Tooth elevator bolt for installation. Designed to be used with fender or flat and lock washers and hex or locking nuts. If buckets are being installed on chain, use hex head bolts, nuts and washers.
Ecommended for chain mounting applications.
Both the urethane and polyethylene are designed to FDA specifications for direct contact with food products.
Recommended Agricultural Applications for the Alaska
(Recommended but not restricted to handling these specific products)
|Beans||Fertilizer||Meat Scrap||Potash||Sunflower Seeds|
|Cotton Seed||Grass Seed||Pellets||Seed|
BUCKET MATERIAL CHART
|APPLICATION||Grain & Food Products||Hot/ high impact/ abrasive dense products||Heavy abrasion/ sticky materials||As Required|
|TEMPERATURE RANGE||-120Â°F to +180Â°F (210Â°F intermittent)||-60Â°F to +300Â°F (350Â°F intermittent)||-60Â°F to +180Â°F (210Â°F intermittent)||As Required|
|FDA APPROVED MATERIAL||Yes||Available upon request||Yes||As Required|
|COMMENTS||Economical high density polyethylene. FDA approved material for handling food grade products.||Best for high heat applications with tough impact and abrasion needs.||Most flexible and abrasion resistant. Resists product sticking and sharp cutting particles.||Engineered for specific requirements such as extreme temperature abrasion color or product discharge.|